Back To Solicitation Listing

Informal Solicitation Details
Informal Number
1097651
Closing Date
Jul 15 2019 11:00AM
Title
Tandem-Axle Open Utility Trailer with Drop Deck to Transport Scissor Lifts
Contact
Kathleen Hynes
+12407775625
Kathleen.Hynes@montgomerycountymd.gov
Scope
1. Weight capacity of the trailer must be 10,000 lb.
2. Trailer weight must not exceed 3,800 lb. with options included.
3. Trailer must be specifically designed for loading poor traction, low ground clearance equipment.
4. Loading and unloading must be done from ground level.
5. Deck length must be at least 14’, including the loading ramp.
6. Trailer must have a full-width, low-angle loading ramp not less than 18” long.
7. Deck width must be at least 70”.
8. Entire trailer deck must raise and lower between travel height and loading height (flush with the ground) by a hydraulic mechanism, whether empty or loaded to capacity, in 20 seconds or less.
9. Raising and lowering the deck must be able to be done remotely.
10. Trailer deck must not tilt either front-to-back or side-to-side from a flat, level plane.
11. Trailer deck must be heavy duty diamond plate steel.
12. Wheels must be at least 16” with weight-rated tires mounted that are appropriate for the weight of the trailer at curb weight plus a maximum payload.
13. There must be a spare tire such that all five tires are the same, and it must be mounted on the trailer with a spare tire bracket such that it does not intrude upon the load space.
14. Trailer and wheels must comply with requirements prescribed in FMVSS 110.
15. Wheels and tires must be new, factory specified, and factory installed.
16. The trailer must not have fenders. Tires and wheels must be within the width of the chassis and not extend outward beyond the footprint of the chassis.
17. The trailer and the wheels must be powder coated a factory standard color, to be determined at the time of order. The color of the wheels and the color of the trailer do not have to match.
18. Suspension may be spring or rubber.
19. Trailer must have a 2 5/16” ball coupler that is interchangeable with a heavy-duty ring coupler. The quote must include only the b